Library: X Controls Devices

Cost: 0
Log in and join an organization to purchase

Credits: Add credits

Owner: X Controls

Description:
Various blocks for devices including those sold by X Controls.

X Controls xVCU Device Library

Library of xVCU blocks for devices sold in the X Controls Store and devices used frequency by X Consulting.

List of Blocks

The following blocks are provided by this library.

canpot

The CANPot is a dual digital potentiometer controlable over CAN bus. This controller is useful for generating an arbitrary resistance or emulating a pot knob such as a pump speed control, heater temperature slider, or fuel level sensor.

cm_inverter

This block is capable of interfacing with any of the Cascadia Motion inverters or integrated drive units such as the CM200, iM-225, iM-375 or the older PM150 and PM250 inverters.

dilong_dcdc and dilong_obc

Support for standalone and combo Dilong and Cascadia Motion OBC/DCDC units. This block supports DCDC units with and without DC current limts and voltage setpoint and OBC unit with and without AC voltage/current sense.

ivt_s

Support for reading the current and three HV sense channels of the Isabellenhütte IVT-S series current sensor.

netpower_400_dcdc and netpower_400_obc

This block interfaces with the 400V version of the NetPower OBC/DCDC combo units such as the CAD26K6A-14K5L and compatible units.

netpower_800_dcdc and netpower_800_obc

This block interfaces with the 800V version of the NetPower OBC/DCDC combo units such as the CAD26K6B-143K0L and compatible units.

pfvd2

The Pump Fan Valve Driver can drive up to 8 loads and is ideal for controlling pumps and valves independently with its analog and digital inputs or from a VCU via CAN bus.

sendyne_sim10x

Support for controlling and reading measurements from the Sendyne SIM100 and SIM101 isolation montiors.

stafl_bms1000

This block interfaces with a BMS1000M BMS master from Stafl Systems.